What to do with Multiple Devices in 1 area?
Delta 2 power stations are great. But, not enough outlets. So I used a power strip for the devices temporarily until have better strategy.
4 Samsung monitors, each having own 24vdc supply.
6 tiny pc computers, each with 19vdc supply.
USB hubs & supplies out the yin yang, most 12vdc power adapters
3D printer, plugs into 120vac direct.
Everything turned off, D2 reported a 225w load. Power strip turned off, 0-1 watt load. Lots of wasted power.
Used a spare Ecoflow 12v100Ah TM LFP battery, few 20v dc dc converters, a 24vdc dc dc converter, few 12vdc dc dc converter, and a 5vdc converter rated at 40A. All accept 8-40vdc input.
Monitors now have their own supply.
The computers have 2 supplies.
Hubs & router have their own supply, 12vdc
Hubs & devices that need 5vdc have their own.
3D printer will remain 120vac.
Battery is maintained at 13.8vdc / 3.45v per cell using a meanwell 350w 15v smps trimmed to 13.8v.
What did I gain?
Lot less of wiring rat's nest.
Continuous battery back since I am starting from battery.
Meanwell smps can power everything and charge battery effectively.
Here's the best part: that 225w load when everything is 'off' dropped to 75w. Then dropped another 20-odd watts when turned off network wakeup on computers. Dropped another 15 when monitors moved from auto-on to 'power button on'. 40w. Down from 225 with all ac adapters. Router draws 7. NVR (itself) draws 3. Network switch draws 2. 5v40A supply draws 10. Inkjet printer @ 4w. The meanwell is drawing the rest.
Do I need the Delta2? Yes, it powers the printer (for family), as well as 3D printer (400+ watts active print).
So what have I done? I have extended D2 backup time to days if not actively printing. Removed majority of standby power used by computing equipment. I incorporated a battery power supply for computer equipment that can last for 13 hours off 1 12v100Ah TM Ecoflow battery. I am no longer subject to power spikes / brownout.
Next step is putting meanwell on timer for 'free at night' charging.