Hi, EcoFlow friends! 👋We’re excited to announce a special EcoFlow Forum benefit tied to the launch of the EcoFlow TITAN Series. 🤝In early June, we invited 30 of the most active Forum members since the EcoFlow Forum relaunch to apply for this exclusive opportunity. After reviewing the applications together with the CMI team and Product Manager based on our selection criteria, 10 Forum contributors were selected to take part in the pre-launch field trial.Let’s give a big welcome to @bogieb @KT Power @Kat @RightyWright @Mortimer Mortensen @MKCagle @Luke [Ecoholic] @Rich Mc @Tammy @Grace Da OG! 🎉They’ll be putting the EcoFlow TITAN Series to the test in their own homes and sharing their real-world experiences with the community, including:🏠 Their home setups and what they’re powering🎯 How TITAN handles their everyday power needs🔧 Installation and day-to-day use⚡ What surprises them along the way💬 And plenty more from their hands-on experienceChances are, one of their setups or use cases will be similar to yours. Follow along to see how the EcoFlow TITAN Series performs in real homes and hear directly from the people using it.Stay tuned for their first updates, and explore more about the EcoFlow TITAN Series here. 🚀And there’s more coming! Keep an eye on the Smart Savings category this October for upcoming events, more community stories, and more chances to earn rewards. 🤝What do you think of this exclusive Forum benefit? Let us know in the comments — and tell us what kinds of member benefits you’d love to see in the future! ✨

During the beta testing of the SHP10 and Titan Plus, testers are asked to perform certain scenarios that would be applicable for our situations. One of those scenarios is High-Power Appliance Usage During Outage.The circuits set up on the SHP includes a mini split, fridge (which happens to include the microwave outlet), two pellet stoves and lights. I'm not generally a heavy electric user, so unfortunately can't even get near the limits that the Titan is rated for (kind of wish I'd had the dryer circuit hooked up just for this test - LOL).I simulated an outage by flipping my main breaker. Because pellet stoves are fairly low draw, I turned on both heads of my 2-ton mini split for heat (which, was set as non-priority so I had to tell the app to turn it on), and set the thermostat for 4* higher than the room temp was at. I held my fridge door open until it started up, turned on every light and ran my microwave (1,500w draw) for 5 minutes. The system didn't break a sweat running everything. Unfortunately I did not think to get screen shots of the max power that was being output. It was not nearly to the Titan's ability, but what is considered very high usage for me.The Titan has plenty of power to handle high wattage use during a power outage, although one must be mindful of how that affects the capacity/longevity ratio.

I am lucky and was selected as a beta tester for the SHP10 / Titan Plus and I want to thank the EcoFlow team for this opportunity!I have never used a smart panel before, and the manual was for installation, so figuring out things was very frustrating for me (the manual has since been released). I was also using the beta App, as I was instructed, so the regular app may produce different results.The SHP has, nominally, 10 circuits, although the first 2 are set up for an electric dryer, which I chose not to have hooked up. My mini split took up circuits 3&4, with the rest taken by pellet stoves, refrigerator and various lights. 1st, I'd like to say, for every simulated outage I tried, by flipping my main breaker switch, the entire system worked flawlessly in providing power to my selected circuits. That performance was rock solid and impressive for those of us who have only used an MTS, or stations at POU.Setting up the circuit priorities was easy, and priorities could be changed on the fly. Non-priority circuits are not turned on during power outages, but they can be switched on thru the app. I could also tell how much power was being pulled by each circuit and see real time changes as I turned things on/off.I could not use Self-Powered and Intelligent Modes as the SHP needs to detect solar for those to work. I was able to set up Scheduled Tasks to charge during the afternoon (when my grid-tied solar has max production), then discharge in early morning hours. The charging always worked, although a couple of times it did ignore my set input wattage (I tried 1,000w and 600w so as not to pull more than my grid-tied solar produced). This may be due to having Storm Guard on, but it didn't tell me it was activated.Discharge tasks always worked, but at times immediately deactivated by the system. There is a 150w required pull that may be addressed in future FW updates.Flawless backup performance, with some hiccups that should be addressed in future updates.

I wanted to see how the TITAN would handle a heavy load with all 10 circuits on the Smart Panel 10 running my house, including the refrigerator and chest freezer. I decided to add a couple of high-wattage appliances on top of that: my microwave and electric clothes dryer, which uses over 5,000 watts on its own. The TITAN reached a peak output of 7.48 kW, exceeding its advertised 7.2 kW output, and handled the load without resetting or powering down!I’m really impressed with how the TITAN handled this test. It’s great to see what it can do under real-world conditions, and I’m looking forward to putting it through more tests! ⚡️🏠